Jual Yaskawa SGMCS Direct Drive Sigma-V

/ SERVO MOTOR & DRIVE, YASKAWA / Oleh

Yaskawa SGMCS Direct Drive Sigma-V

Yaskawa SGMCS Direct Drive Sigma-V

Kami menjual Yaskawa SGMCS Direct Drive Sigma-V berkualitas Original dan dijamin keasliannya. Yaskawa adalah merk dagang terkemuka yang telah dipakai hampir di semua pabrik yang ada di Indonesia. Kami siap memenuhi kebutuhan Servo & Drive Yaskawa untuk Anda dengan cepat dengan harga bersaing di seluruh Indonesia.

6-600 Nm peak torque, high inertia

The SGMCS servomotor line is designed for direct drive applications where the load is directly attached to the motor surface. Pre-tapped mounting holes and a hollow-through shaft permit a variety of machine designs. This direct drive motor has substantial load carrying bearings, low speed windings, and 1,048,576 ppr absolute encoders. 200 volt windings are available with maximum speeds up to 500 rpm. There are 17 sizes available with up to 5,310 lb-in (600 Nm) of peak torque.

Yaskawa SGMCS Direct Drive Sigma-V Features Highlights

Direct Drive Technology

  • Direct connection to load increases torsional stiffness
  • Improved positioning accuracy
  • Backlash free operation
  • Highly dynamic load reversals without damaging components
  • No maintenance for lubrication

High Performance

  • High torque operation is realized without gears
  • Peak torques up to 5310 lb-in (600 Nm)
  • Maximum speeds up to 500 rpm

High-Resolution Serial Encoder

  • 1,048,576 ppr absolute encoder standard1
  • Amplifier automatically recognizes the motor and optimizes parameters
  • Error checking eliminates lost motion from electrical noise

Application Emphasis

  • Dial Tables
  • Transfer Lines
  • Die Actuators
  • Electronic Parts Assembly
  • Print Registration

Enclosure

  • Totally enclosed, self cooled IP42

Certified International Standards

  • UL, cUL recognized (File #: E165827), CE compliance

1 ppr is the resolution in pulses per revolution as seen by the controller (post quadrature)

Specifications

Small Capacity

SpecificationDescription
Time RatingContinuous
Thermal ClassA
VibrationV15
Withstand Voltage1500VAC 1 min
Insulation Resistance10MW minimum at 500VDC
EnclosureTotally-enclosed, self-cooled
Ambient Humidity20 to 80% (non-condensing)
ExcitationPermanent magnet
Drive MethodDirect drive
MountingFlange-mounted
Enclosure RatingIP42
Ambient Temperature0 to 40ºC

Medium Capacity

SpecificationDescription
Time RatingContinuous
Thermal ClassF
VibrationV15
Withstand Voltage1500VAC 1 min
Insulation Resistance10MW minimum at 500VDC
EnclosureTotally-enclosed, self-cooled
Ambient Humidity20 to 80% (non-condensing)
ExcitationPermanent magnet
Drive MethodDirect drive
MountingFlange-mounted
Enclosure RatingIP42
Ambient Temperature0 to 40ºC

Yaskawa SGMCS Direct Drive Sigma-V Models & Ratings

Ratings
Model SGMCS-
02B3B
05B3B
07B3B
04C3B
10C3B
14C3B
Rated Output1W
42
105
147
84
209
293
Rated Torque1,2N•m
2.00
5.00
7.00
4.00
10.0
14.0
Peak Torque1N•m
6.00
15.00
21.0
12.0
30.0
42.0
Stall Torque1(60min-1)N•m
2.05
5.15
7.32
4.15
10.4
14.9
Rated Current1ARMS
1.8
1.8
1.4
2.1
2.0
2.0
Instantaneous Max Current1ARMS
5.1
5.1
4.1
6.0
5.8
5.9
Rated Speed1min-1
200
200
200
200
200
200
Max Speed1min-1
500
500
500
500
400
300
Torque ConstantN•m/ARMS
1.28
3.12
5.51
2.16
5.56
7.6
Rotor Moment of Inertiakg•m2 x 10-4
25.0
51.0
77.0
77.0
140
220
Rated Angular Acceleration1rad/s2
800
980
910
520
710
640
Absolute Accuracyarc•sec
± 15
± 15
± 15
± 15
± 15
± 15
Repeat Accuracyarc•sec
± 1.3
± 1.3
± 1.3
± 1.3
± 1.3
± 1.3
  1. Values when the servomotor is combined with an SGDH servo amplifier.
  2. Values for the Rated Torque are for the continuous allowable torque with the following heatsinks:
    Heatsink dimensions: SGMCS-_ _B 350 X 350 X 12mm, SGMCS-_ _C 450 X 450 X 12mm, SGMCS-_ _D 550 X 550 X 12mm, SGMCS-_ _E 650 X 650 X 12mm
Ratings
Model Number SGMCS-
08D3B
17D3B
25D3B
16E3B
35E3B
Rated Output1W
168
356
393
335
550
Rated Torque1,2N•m
8.00
17.0
25.0
16.0
35.0
Peak Torque1N•m
24.0
51.0
75.0
48.0
105
Stall Torque1(60min-1)N•m
8.64
19.2
27.2
17.6
38.3
Rated Current1ARMS
2.0
2.3
2.7
3.3
3.5
Instantaneous Max Current1ARMS
5.9
6.6
7.9
9.4
10.0
Rated Speed1min-1
200
200
150
200
150
Max Speed1min-1
500
350
250
500
250
Torque ConstantN•m/ARMS
4.46
8.28
10.3
5.58
11.1
Rotor Moment of Inertiakg•m2 x 10-4
285
510
750
930
1430
Rated Angular Acceleration1rad/s2
280
330
330
170
240
Absolute Accuracyarc•sec
± 15
± 15
± 15
± 15
± 15
Repeat Accuracyarc•sec
± 1.3
± 1.3
± 1.3
± 1.3
± 1.3
  1. Values when the servomotor is combined with an SGDH servo amplifier.
  2. Values for the Rated Torque are for the continuous allowable torque with the following heatsinks:
    Heatsink dimensions: SGMCS-_ _B 350 X 350 X 12mm, SGMCS-_ _C 450 X 450 X 12mm, SGMCS-_ _D 550 X 550 X 12mm, SGMCS-_ _E 650 X 650 X 12mm
Ratings
Model SGMCS-
45M3A
80M3A
1AM3A
80N3A
1EN3A
2ZN3A
Rated Output 1
W
707
1260
1730
1260
2360
3140
Rate Torque 1
N•m
45
80
110
80
150
200
Instantaneous Peak Torque 1
N•m
135
240
330
240
450
600
Stall Torque1
N•m
45
80
110
80
150
200
Rated Current 1
ARMS
5.80
9.74
13.4
9.35
17.4
18.9
Instantaneous Max. Current 1
ARMS
17
28
42
28.0
56
56
Rated Speed 1
min-1
150
150
150
150
150
150
Max. Speed 1
min-1
300
300
300
300
250
250
Torque Constant
N•m/ARMS
8.39
8.91
8.45
9.08
9.05
11.5
Rotor Moment of Inertia
kg•m2 x 10-4
388
627
865
1360.0
2470
3060
Rated Angular Acceleration
rad/s2
1160
1280
1270
588
607
654
Absolute Accuracy
arc•sec
± 15
± 15
± 15
± 15
± 15
± 15
Repeat Accuracy
arc•sec
± 1.3
± 1.3
± 1.3
± 1.3
± 1.3
± 1.3
  1. Values when the servomotor is combined with an SGDH servo amplifier and when a steel-plate heatsink (750 x 750 x 45mm) is used for cooling.

Note: Values when the linear motor is combined with the SGDH Sigma II amplifier.

1These values are with aluminum heatsink (170A: 254x254x25mm, 320A/460A : 400x500x40mm) mounted to the motor coil.
2These values are with aluminum heatsink (609x762x50mm) mounted to the motor coil.

Servo & Drives Yaskawa Lainnya

Yaskawa SGMCS Direct Drive Sigma-V    Servo Yaskawa Sigma X    Servo Yaskawa Sigma V    Servo Yaskawa Sigma S

Pesan Sekarang

Pesan sekarang untuk cepat memenuhi kebutuhan YASKAWA Servo Drive & servo Motor di perusahaan anda. Kami Distributor Servo Drive Yaskawa  dan banyak  Servo Drive Lainnya.  Untuk informasi lebih lanjut silahkan hubungi Sales Marketing kami.